Cold Room Installation and Refrigeration Services in Kenya
Purpose-built cold rooms, walk-in freezers, and blast chillers for food processing, hospitality, pharmaceuticals, and floriculture across Nairobi, Mombasa, Eldoret, and Nakuru. We engineer tight temperature tolerances, redundant compressors, and IoT-based remote monitoring for Kenya's cold chain industry.
Design & Load Calculation
Kenya's horticulture, floriculture, and food processing industries lose significant product value every year to cold chain failures, and the majority of those failures trace back to a cold room that was undersized, poorly insulated, or fitted with a refrigeration plant that didn't match the actual heat load. Élan Climat calculates cooling load from first principles for every project — product type and quantity, door-opening frequency, ambient conditions, and insulation performance — rather than sizing off a generic per-cubic-metre rule.
For multi-chamber facilities, such as a flower export site in Naivasha with separate pre-cooling, cold storage, and dispatch zones, we design each chamber's refrigeration plant independently so that one zone's door traffic or product load doesn't compromise temperature stability in another.
Construction & Materials
Our cold rooms use PIR (polyisocyanurate) insulated panels for maximum thermal efficiency per millimetre of panel thickness, with food-safe, hygienic interior finishes that meet the cleaning and inspection requirements of food safety audits. EC (electronically commutated) fan motors are specified as standard in evaporator units, reducing running costs compared to older AC motor designs while also running quieter — a meaningful factor in hospitality and retail settings where the cold room sits close to guest or customer areas.
Refrigeration Plant & Redundancy
Critical facilities — those where a refrigeration failure would mean significant product loss or, for pharmaceutical cold chains, a genuine compliance risk — receive duty-standby compressor configurations. This means a second compressor can take over automatically if the primary unit needs servicing or fails, so the product inside is never left exposed to a single point of failure.
Monitoring & Compliance
Every new installation includes IoT-connected temperature and door-alarm monitoring with SMS and email alerts, and we can retrofit this monitoring onto cold rooms installed by other companies. For pharmaceutical applications, cold rooms are designed to WHO PIC/S guidelines, with the data logging and reporting capability that compliance audits require.
Servicing & Compressor Maintenance
We service refrigeration systems regardless of who originally installed them. Common service work includes compressor overhaul, refrigerant recharge using EPA-compliant recovery equipment, door seal replacement — a frequently overlooked source of energy loss and frost buildup — controller calibration, and panel leak repair, which we locate using the same diagnostic rigour we apply to a new build.
Cold Room Installation Across Kenyan Industries
Pre-cooling and cold storage facilities for flower farms in Naivasha, Thika, and the Mt. Kenya region, with the precise humidity control that flower quality depends on alongside temperature.
Walk-in chillers, blast freezers, and display cabinet refrigeration for supermarkets, butcheries, and food processing facilities, engineered for hygiene compliance and consistent product quality.
Cold rooms designed to WHO PIC/S guidelines for vaccine and medicine storage, with monitoring and reporting suited to regulatory inspection requirements.
Quiet-running walk-in chillers and freezers for hotel and restaurant kitchens, sized to peak kitchen demand without oversized running costs during quieter periods.
What Sets Our Cold Room Installation Apart
±0.5°C Temperature Tolerance
Tight temperature control through precision-selected evaporator coils and EC fan technology.
Redundant Compressor Designs
Critical facilities receive duty-standby compressor configurations so product is never at risk during servicing.
IoT Monitoring Standard
Every installation includes real-time remote temperature monitoring with SMS alerts as standard.
Floriculture Specialists
Deep experience in Kenya's flower export industry, including pre-coolers and controlled humidity rooms.
Common Questions About Cold Room Installation in Kenya
How much does a cold room cost in Kenya?
Cold room costs in Kenya depend on size, temperature range, and specification level. A small 10m² walk-in chiller starts from approximately KES 500,000 installed, while a larger multi-chamber facility for food processing or floriculture can cost KES 3–10 million. We provide itemised quotations after a site survey.
What temperature ranges can your cold rooms achieve?
We design cold rooms across the full commercial temperature spectrum: positive chill rooms (+2°C to +8°C) for fresh produce and dairy; medium-temperature rooms (-5°C to -18°C) for frozen food; and blast freezers down to -35°C for rapid product freezing. Pharmaceutical cold rooms are designed to WHO PIC/S guidelines.
Do you install cold rooms for flower farms in Kenya?
Yes. We have significant experience in Kenya's floriculture industry, designing pre-cooling and cold storage facilities for flower farms in Naivasha, Thika, and the Mt. Kenya region. Floriculture cold rooms require precise humidity control in addition to temperature, which we achieve through specialised evaporator coil design.
Can you service an existing cold room installed by another company?
Yes. We service all refrigeration systems regardless of original installer or brand. Common services include compressor overhaul, refrigerant recharge (using EPA-compliant recovery equipment), door seal replacement, controller calibration, and panel leak repairs.
Do you provide remote temperature monitoring for cold rooms in Kenya?
Yes. All new installations include IoT-connected temperature and door alarm monitoring with SMS and email alerts. We can also retrofit our monitoring system onto existing cold rooms, providing real-time data logging and compliance reporting for food safety audits.
How long does it take to install a commercial cold room in Kenya?
A standard single-chamber walk-in cold room typically takes 2–4 weeks from order to commissioning, including panel fabrication, refrigeration plant installation, and controls setup. Multi-chamber facilities for floriculture or food processing can take 6–10 weeks depending on scale.
What insulation thickness do I need for a cold room in Kenya?
Insulation thickness depends on the target temperature and ambient conditions. Chill rooms typically use 80–100mm PIR panels, while freezer rooms and blast freezers require 100–150mm or more to maintain efficiency and prevent condensation on external surfaces.
Can you upgrade an old cold room to reduce energy costs?
Yes. Common upgrades include replacing AC fan motors with EC motors, improving door seals, upgrading controllers for better defrost cycle management, and in some cases re-skinning panels where insulation has degraded — all of which can meaningfully reduce running costs without a full rebuild.
Other Services We Offer in Kenya
Get a Quote for Cold Room Installation in Kenya
Our engineers are ready to assess your requirements and provide a detailed, itemised proposal — at no cost to you.