Electrical Installation and Engineering Services in Kenya
Low-voltage distribution, standby generators, earthing systems, and smart building automation across Nairobi, Mombasa, and Kenya. We design and install electrical infrastructure that meets EPRA standards, protecting critical loads for hospitals, office parks, industrial facilities, and residential developments.
Design & Load Engineering
Power reliability is non-negotiable for Kenya's hospitals, data centres, hotels, and industrial facilities, and reliability starts with a properly engineered load schedule — not a panel board sized after the fact. Our electrical engineering team builds detailed load schedules for every project, accounting for diversity factors, future expansion capacity, and the specific characteristics of motor loads, IT equipment, and HVAC plant that each draw power differently from simple resistive loads.
Where harmonics are a concern — common in buildings with significant variable-speed drive or IT load — we design in harmonic mitigation at the distribution level rather than treating it as an afterthought once equipment starts tripping breakers or overheating neutral conductors.
LV Distribution & Protection
We design and install low-voltage distribution boards, sub-distribution panels, and final circuit wiring with selective coordination of protection devices — meaning a fault on one circuit trips only the breaker protecting that circuit, not the entire floor or building. This is a detail that's frequently overlooked in budget installations and one that turns a minor fault into a major outage when it's missing.
Standby Power & Generators
We supply and install diesel standby generators from 20kVA to 2000kVA, complete with automatic transfer switches (ATS) that detect a grid failure and bring the generator online within seconds, acoustic enclosures for noise-sensitive sites, properly sized fuel tanks, and compliant exhaust systems. Generator earthing is designed to EPRA requirements, and we provide maintenance contracts covering fuel polishing, load bank testing, and annual engine overhauls — the upkeep that determines whether a generator actually starts when it's needed.
Earthing, Bonding & Lightning Protection
Proper earthing and bonding protects both people and equipment, and lightning protection is a genuine consideration for buildings across much of Kenya's highland regions. We design earthing systems to achieve target resistance values appropriate to the building's risk profile, with bonding carried through to all extraneous conductive parts, and lightning protection systems sized to the structure's height and exposure.
Building Automation & Energy Management
For commercial and institutional clients, we install building automation and smart control systems that reduce energy waste through demand-based lighting and HVAC control, scheduling, and centralised monitoring. These systems integrate with solar-electrical hybrid setups where present, optimising automatically between grid, solar, and battery sources for maximum cost savings rather than requiring manual switching.
Preventive Surveys & Compliance
We offer infrared thermographic surveys that scan electrical panels, busbars, and connections for hot spots caused by loose connections, overloaded circuits, or failing components — the most cost-effective way we know of to prevent electrical fires and unplanned outages before they happen. All design and installation work is carried out by EPRA-registered engineers, in compliance with EPRA requirements and Kenya's adoption of IEC 60364.
Electrical Across Kenyan Industries
Resilient power infrastructure with automatic transfer to standby generation, designed around the zero-tolerance-for-outage requirements of critical medical equipment.
Selectively coordinated distribution with harmonic mitigation and redundant supply paths, engineered to keep IT load running through both grid faults and routine maintenance.
LV distribution and motor control sized for heavy industrial loads, with power factor correction to reduce utility penalty charges and improve overall system efficiency.
Standby generator and ATS systems sized to cover essential apartment loads during outages, integrated cleanly with each building's existing distribution.
What Sets Our Electrical Apart
EPRA-Licensed Engineers
All electrical design and installation work is carried out by EPRA-registered engineers — legally and technically compliant.
Infrared Thermography
We offer preventive IR surveys that catch dangerous hot spots before they cause fires or outages.
Generator Specialists
Full generator supply, installation and maintenance from 20kVA to 2000kVA.
Smart Building Integration
Building automation and energy management systems that reduce electricity bills and carbon footprint.
Common Questions About Electrical in Kenya
Do you handle electrical installations for commercial buildings in Kenya?
Yes. We handle complete electrical installations for commercial buildings including LV distribution boards, sub-distribution panels, final circuit wiring, containment systems, earthing and bonding, emergency lighting, fire alarm interfaces, and building management system integration.
Can you install standby generators in Nairobi?
Yes. We supply and install diesel standby generators from 20kVA to 2000kVA, complete with automatic transfer switches (ATS), acoustic enclosures, fuel tanks, exhaust systems, and EPRA-compliant earthing. We also provide maintenance contracts covering fuel polishing, load bank testing, and annual engine overhauls.
What is an infrared thermographic survey and why does my building need one?
An infrared thermographic survey uses thermal imaging cameras to scan electrical panels, busbars, and connections for hot spots caused by loose connections, overloaded circuits, or failing components. It's the most cost-effective way to prevent electrical fires and unplanned outages. We recommend annual surveys for commercial buildings and industrial facilities.
Are your electrical installations EPRA compliant in Kenya?
Yes. All our electrical installations are designed and executed to comply with EPRA (Energy and Petroleum Regulatory Authority) requirements and Kenya's adoption of IEC 60364. Our engineers are licensed and registered with EPRA for electrical contracting work.
Do you install solar-electrical hybrid systems in Kenya?
Yes. We specialise in integrating solar PV systems with existing LV electrical infrastructure, including grid-tied hybrid inverters, battery storage, automatic source changeover, and energy management systems that optimise between grid, solar, and battery sources for maximum savings.
What size generator do I need for my building in Kenya?
Generator sizing depends on which loads need to be covered during an outage — essential lighting and lifts only, or the full building load. We calculate this from your actual load schedule rather than a rough estimate, since both undersizing and oversizing carry real cost and reliability consequences.
How often should electrical systems be inspected in Kenya?
We recommend annual infrared thermographic surveys for commercial and industrial buildings, alongside periodic inspection and testing of distribution boards, earthing systems, and protective devices — typically every 1–3 years depending on building use and load intensity.
Can you upgrade an existing building's electrical system to support higher loads?
Yes. We assess existing distribution capacity, cabling, and earthing against the new intended load — common with HVAC retrofits, EV charging additions, or solar installations — and design the necessary upgrades, which can range from a new sub-board to a full distribution overhaul depending on the gap.
Other Services We Offer in Kenya
Get a Quote for Electrical in Kenya
Our engineers are ready to assess your requirements and provide a detailed, itemised proposal — at no cost to you.